GPU

### **GeForce Series**:

GeForce 970 and above

**Note**:

1. Requires connection to a monitor or the use of a graphics card spoofing tool.

2. Drivers after version 551.23 support a maximum of 8 concurrent streams, drivers after version 531.61 support a maximum of 5 concurrent streams, and older versions support a maximum of two to three concurrent streams. For more concurrent streams, please consult customer service.

### **Quadro Series**:

P4000, P5000, P6000, RTX4000, RTX5000, RTXA5000, etc.

**Note**:

1. Requires connection to a monitor or the use of a graphics card spoofing tool.

### **Tesla Series**:

P40, V100, M60, T4, A10, A40, L4, etc.

**Note**:

1. Requires Grid drivers and corresponding authorization.

> Remarks:

1. **Installation of GeForce Series Graphics Cards:**

- Visit the NVIDIA official website to download the corresponding driver: [NVIDIA Official Driver Download Link](https://www.nvidia.cn/geforce/drivers/)

- During the installation process, select "NVIDIA Graphics Driver," as shown in the image below:
     ![](https://docs.paraverse.cc/media/202504/7ce3fbd5c9d848f4a9025055814ed8678082.png)

2. **T4 Graphics Card Installation Steps:**

- **Step One:** Apply for authorization (purchase authorization from NVIDIA or its integrators).

- **Step Two:** After approval, register the information using the following link: [Registration Information Link](https://enterpriseproductregistration.nvidia.com/?LicType=COMMERCIAL&ProductFamily=SXN)

- **Step Three:** Upon completion of registration, you will receive a response email from NVIDIA within approximately 24 hours. Follow the instructions in the email (set up the authorization server): [Authorization Server Setup Operation Link](https://docs.nvidia.com/grid/latest/grid-software-quick-start-guide/index.html)

- **Step Four:** Open the NVIDIA Control Panel, go to "Licensing," select "Quadro Virtual Data...," and enter the IP and port number of the authorization server:

![](https://docs.paraverse.cc/media/202504/3e90d3138a8c4aeda864b23851ddaa3a5635.png)

- **Step Five:** Check if the Grid authorization is set up successfully:

- Open the command prompt, navigate to "C:\Program Files\NVIDIA Corporation\NVSMI"

![](https://docs.paraverse.cc/media/202504/45d1dd8cab3b4607a60251e7972f78366584.png)

- Enter the command: `nvidia-smi.exe -q`

- Check if the authorization type is DWS authorization and if the authorization status is displayed as "Authorized":

![](https://docs.paraverse.cc/media/202504/c25678f9fec141cba1c3f978c1cde6441878.png)