Cors For Upload

**Cross-Origin Application Upload Allowance**

During the process of secondary development, to prevent token expiration issues in the application upload interface, we have introduced a feature to allow cross-origin application upload lists. Under trusted domains, there is no need to pass verification parameters, enabling direct interface calls for application uploads.

### Notes:

1. Format: `protocol://domain or IP:port`, multiple cross-origin addresses separated by commas.

2. Differentiate between the system's cross-origin access setting and the configuration for allowing cross-origin application uploads: `access-control-allow-origin` and `upload-control-allow-origin`.

3. The system's cross-origin access setting and the configuration for allowing cross-origin application uploads will take effect simultaneously. If you only need to configure allowing cross-origin application uploads, set only `upload-control-allow-origin`.

### Steps:

1. Open the `\larkxr-center\application.properties` file, add the configuration: `pxy.security.upload-control-allow-origin=http://192.168.0.55:8181`

- This will allow direct interface calls for application uploads under the domain `http://192.168.0.55:8181` without the need to pass verification parameters.

### Prompt:

- If the client's access source is not from the page `http://192.168.0.55:8181` or is from a different source than the interface address, application uploads will not work correctly, and a "No access permission" message will be displayed.